Reznor® V3 Series Model UDAS gas-fired separated combustion unit heaters are available in 14 sizes ranging from 30000 to 40000 Btu/hr gas input. All sizes are approved for commercial/industrial installations. Sizes 30 to 125 carry an additional approval for use in attached residential garage/workshop application. Model UDAS heaters are designed for 82-83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association (CSA). Reznor® V3 Series unit heaters have a refreshing new appearance with a glossy white cabinet finish and less visible hardware. Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30 to 125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a "G” terminal to the low voltage strip, along with the new design of the circuit board, allows for fan only operation (without adding relays). All units have a factory-installed gas line nipple to the exterior of the cabinet for easy gas service connection.
Reznor® Low Static Unit Heater, UDAS Model, 75000 Btu/hr, 115 VAC, 3.3 A, 961 cfm Flow Rate, 0.06 hp Open/Enclosed HP Rating, 217 W Power, 1 ph, 60 Hz Frequency, External Gas Connection, 1/2 in Connection, Liquid Propane/Natural Gas Fuel, 12 in Dia Fan, 83 % Efficiency, Totally Enclosed Fan Motor, 1550 rpm Rotational Speed, 4 in Dia Vent, Multi-Try Direct Spark Ignition, 1 Stage, Ceiling Mounting, 49 dB at 15 ft Sound Level, Glossy White, 50 to 60 deg F, 26-5/8 in W x 15-1/8 in H Dimensions
|Power Rating||:||217 W|