Reznor® V3 UDAP-30 Unit Heater, 115 V, 1.9 A Full Load, 109 W, 30000 Btu/hr Input, 24600 Btu/hr Output BTU, 1 -Phase
Reznor V3 series model UDAP gas-fired unit heaters are available in 14 sizes ranging from 30000 - 400000 Btu/hr gas input. All sizes are approved for commercial/industrial installations. sizes 30 - 125 carry an additional approval for use in attached residential garage/workshop application. Model UDAP heaters are designed for 82 - 83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association (CSA). Reznor V3 series unit heaters have a refreshing new appearance with a glossy white cabinet finish and less visible hardware. Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for sizes 30 - 125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove.
Reznor® Unit Heater, Series: V3, UDAP Model, 30000 Btu/hr Input, 24600 Btu/hr Output BTU, 115 V, 1.9 A Full Load, 475 ft/min, 456 cu-ft/min, 109 W, 1 -Phase, 60 Hz, 1/2 in Gas Connection, Natural Gas Fuel, Direct Spark Ignition, 50 deg F Discharge Air, 25-5/8 in W x 12-1/8 in H x 26 in D
|BTU Rating||:||30000 Btu/hr Input, 24600 Btu/hr Output|
|Voltage Rating||:||115 V|
|Amperage Rating||:||1.9 A Full Load|
|CFM Rating||:||456 cu-ft/min|
|Fuel Type||:||Natural Gas|