Airex 2ODDPM549

The Airex PM-SC MERV 8 pleated filters are available in a wide range of sizes for all commercial, industrial and residential applications. The filter media is a 100% hydrophobic synthetic, electrostatically charged, designed to attract and hold airborne contaminants. The result is a higher efficient filter, 65 to 70% at 5 to 10 um. Initial resistance of a 2 in deep filter is 0.26 WG at 500 fpm. The enclosing frame of the PM-SC is constructed of a rigid, heavy duty moisture resistant beverage board. The support members are an integral part of the frame and are bonded to each pleat on both sides to insure pleat spacing and stability. The filter pack is bonded to the inside periphery of the frame, thus eliminating the possibility of air bypass. The media support grid is available in a heavy expanded wire with an effective open area of not less than 93%. The wire grid is bonded to the filter media to eliminate the possibility of media oscillation and media pull away. UL Approved 217 V as to flammability class 2 UL 900.

Airex Filter Pleated Air Filter, 18 in Width, 30 in Height, 2 in Depth, 8 MERV, 65 to 70 % Filter Efficiency, 0.26 in-WG Initial Resistance, 1 in-WG Final Resistance, 180 deg F, Domestic

• Kimberly-Clark Hydrophobic Polyolefin Media
• Earns LEED points
• Reduces energy cost
• Extended filter life-cycle
• Improves indoor air quality
• Special sizes available upon request
• 0.26 in-WG at 500 fpm initial and 1 in-WG final resistance

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/AIREX_AIREX18301_M8_Specification_Sheet.pdf