Diversitech SGC-12

The SWOOSH® Drain Gun™ is designed to blow out drain lines instantly. New larger 20 g SWOOSH® CO2 cartridges deliver 800 psi of oil free air to clear the line, with 25% more capacity. Each unit comes equipped with a tapered fitting to work on 3/8 to 3/4 in drain openings. Flexible hose assembly maneuvers through cabinets, coils and hard to reach drains. Reduces labor costs and time on service calls.

DiversiTech® SWOOSH® Drain Gun™ Cartridge, Specifications: 20 g, Cartridge, 800 psi, >99.8% Carbon Dioxide, Domestic

• As an extra bonus, the Drain Dawg™ is furnished complete with a tire valve stem chuck
• Never get caught again with a flat tire on your service truck
• Just use your nitrogen cylinder and the Drain Dawg™ to refill your truck tire
• Both the Drain Dawg™ and the Drain Kat™ feature an industry leading brass piston regulator with internal bleed down safety
• The piston regulator lasts 3X as long as a less expensive diaphragm regulator
• The Drain Kat™ includes an integral on-off valve to control gas flow
• Distributors can lock in the replacement cartridge business
• Contractors must buy replacement cartridges for the Drain Gun™ from wholesalers
• The flexible hose assembly enables you to maneuver through cabinets, coils and hard to reach drains
• The Drain Dawg™ comes complete with a 10 ft hose twice the length of competing products
• This longer hose gives you greater flexibility on the job site
• The Drain Kat™ weighs less than 7 lb and even includes a free shoulder strap
• The Drain Gun™ packs cleaning power into a small, lightweight package that fits into your hand
• Both Drain Kat™ and Drain Gun™ give you lightweight alternatives to carrying 40 lb nitrogen tanks
• Drain Dawg™ and Drain Kat™ can be used for many job site tasks
• With a nitrogen fill, you can purge and pressure test copper tube, calibrate pressure controls, clean condensate lines, clean coils, inflate tires, operate air powered tools and cleanout oil burner lines
• With a CO2 fill you can do everything you do with nitrogen except purge and test copper tube or calibrate pressure controls
• CO2 should never be used inside the refrigerant pipe work
• The Drain Dawg™ can supply up to 475 psi, the Drain Kat™ can supply up to 250 psi and the Drain Gun™ up to 800 psi
• Use the Drain Dawg™ when you need a continuous supply of nitrogen or CO2, Drain Kat™ when you need the a small portable 2-1/2 lb cylinder and Drain Gun™ when you need the ultimate in hand held power

• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/DiversiTech_SG1_Specification Sheet.pdf