The ProLine® Series gas water heater is designed to deliver an economical performance that can lower your energy bills and also provide long-lasting value.
Featuring a 40-gallon (nominal) tank and a 40,000 BTU gas burner, the GS6-40-BCS Atmospheric Vent delivers a first hour rating of 67 gallons and a recovery rate of 41 gallons per hour. With an 0.59 Uniform Energy Factor, this water heater is not ENERGY STAR® qualified. It carries a 6-year limited tank warranty, and meets Low NOx emission requirements.
Type |
: |
Natural Gas |
Application |
: |
Gas Tank |
Tank Capacity |
: |
40 Gal |
Tank Size |
: |
Short |
Rated Storage Volume |
: |
38 Gal |
First Hour Rating |
: |
67 Gal |
Vent Type |
: |
Standard Vent |
UEF |
: |
0.59 |
Number of Elements |
: |
2 |
Power Source |
: |
Natural Gas |
Ignition Type |
: |
Piezo push button ignitor |
Phase |
: |
Single |
Diameter |
: |
22 in. |
Product Weight |
: |
135 lbs |
Warranty |
: |
6 Years |
Anode |
: |
Coregard™ Sacrificial Anode |
BTU Rating |
: |
40000 Btu/hr |
Emissions |
: |
Low NOx |
FVIR Certified |
: |
Yes |
Recovery Gallons |
: |
41 Gal |
T&P Relief Valve |
: |
Yes |
Water Connection Location |
: |
Top |
Water Connection Size |
: |
3/4 in. |
- INTELLIGENT CONTROL LOGIC
- The internal microprocessor provides enhanced operating parameters and tighter differentials for precise sensing and faster heating response to optimize performance
- Uses a thermopile to generate the power needed to operate the electronic gas control without requiring an external power source
- The electronic gas control incorporates an LED status indicator that monitors system operation and service diagnostics
- *Not available on 60,000 BTU input models (GS6 50 XCT and GS6 55 XCT)
- GREEN CHOICE® GAS BURNER
- Patented eco-friendly burner design reduces NOx emissions by up to 33% and complies with Low-NOx emission requirements of less than 40 ng/J
- SELF CLEANING DIP TUBE
- Reduces lime and sediment buildup and maximizes hot water output. Made from long lasting PEX cross-linked polymer.
- COREGARD™ ANODE ROD
- Our anode rods have a stainless steel core that extends the life of the anode rod allowing superior tank protection far longer than standard anode rods
- PUSH-BUTTON PIEZO IGNITOR
- Makes lighting the pilot fast and easy with onehand push-button spark ignition
- HEAT TRAP NIPPLES
- Factory-installed for faster installation
- BLUE DIAMOND® GLASS COATING
- Provides superior corrosion resistance compared to industry standard glass lining
- ENHANCED-FLOW BRASS DRAIN VALVE
- Our residential water heaters have a solid brass, tamper resistant, enhanced-flow, ball type, drain valve
- Uses a standard female hose fitting that allows for fast and easy draining during maintenance
- Designed for easy operation, this valve includes an integral screwdriver slot that features a 1/4 turn (open/close) radius, which not only permits full straight-through water flow but also a quick and positive shut off
- CODE COMPLIANCE
- Meets UBC, CEC and HUD National Codes
- Meets the thermal efficiency and standby loss requirements of the U. S. Department of Energy and current edition of ASHRAE/IES 90.1
- Complies with the Federal Energy Conservation Standards effective April 16, 2015, in accordance with the Energy Policy and Conservation Act, (EPCA), as amended
- HIGH ENERGY FACTORS
- Eco-Friendly non-CFC foam insulation, external heat traps and specially designed combustion chamber combine to produce a high Energy Factor for maximum savings on operating costs
- CSA CERTIFIED AND ASME RATED T&P RELIEF VALVE MAXIMUM HYDROSTATIC WORKING PRESSURE 150 PSI DESIGN-CERTIFIED BY CSA INTERNATIONAL
- Certified at 300 psi test pressure and 150 psi working pressure. Listed according to ANSI Z21.10.1-CSA 4.1 standards governing storage tank-type water heaters.
- 6-YEAR LIMITED TANK AND PARTS WARRANTY
- For complete information, consult written warranty or go to statewaterheaters.com