The ProLine® High Recovery gas water heater capacity/input combinations up to 98 gallons/75,100 BTU's produce recoveries up to 81 gallons per hour.
Featuring a 74-gallon (nominal) tank and a 75,100 BTU propane burner, the GS6-75-CRRS-L Standard Vent delivers an 80% Thermal Efficiency and a Uniform Energy Factor of 0.6. This water heater is not ENERGY STAR® qualified. It carries a 6-year limited warranty, and meets Low NOx emission requirements.
Type |
: |
Propane (LP) |
Application |
: |
Gas Tank |
Tank Capacity |
: |
74 Gal |
Tank Size |
: |
Tall |
Rated Storage Volume |
: |
71 Gal |
First Hour Rating |
: |
125 Gal |
Vent Type |
: |
Standard Vent |
UEF |
: |
0.60 |
Number of Elements |
: |
2 |
Power Source |
: |
Propane (LP) |
Phase |
: |
Single |
Standby Loss BTUs per Hour |
: |
1040 Btu/hr |
Diameter |
: |
26 in. |
Product Weight |
: |
270 lbs |
Warranty |
: |
6 Years |
Anode |
: |
Sacrificial Anode |
BTU Rating |
: |
75100 Btu/hr |
Emissions |
: |
Low NOx |
Recovery Gallons |
: |
81 Gal |
T&P Relief Valve |
: |
Yes |
Water Connection Location |
: |
Top |
Water Connection Size |
: |
1 in. |
- HIGHEST RECOVERIES
- Capacity/input combinations up to 98 gallons/75,100 BTU’s produce recoveries up to 81 gallons per hour.
- FULLY AUTOMATIC CONTROLS WITH SAFETY SHUTOFF
- Accurate, dependable control system requires no electric connections.
- Fixed automatic gas shutoff device for added safety.
- GREEN CHOICE® GAS BURNER
- Patented eco-friendly burner design reduces NOx emissions up to 33% and complies with Low-NOx emission requirements of 40 ng/J.
- SELF-CLEANING DIP TUBE
- Reduces lime and sediment buildup, maximizes hot water output. Made from long-lasting Pex cross-linked polymer
- COREGARD™ ANODE ROD
- Our anode rods have a stainless steel core that extends the life of the anode rod allowing superior tank protection far longer than standard anode rods.
- PUSH-BUTTON PIEZO IGNITOR
- Makes lighting the pilot fast and easy with one-hand push-button spark ignition.
- NIPPLES
- Factory-Installed for faster installation
- BLUE DIAMOND® GLASS COATING
- Provides superior corrosion resistance compared to industry-standard glass lining.
- ENHANCED-FLOW BRASS DRAIN VALVE
- Our residential water heaters have a solid brass, tamper resistant, enhanced-flow, ball type, drain valve.
- Uses a standard female hose fitting that allows for fast and easy draining during maintenance.
- Designed for easy operation, this valve includes an integral screwdriver slot that features a 1/4 turn (open/close) radius, which not only permits full straight-through water flow but also a quick and positive shut off.
- CODE COMPLIANCE
- Meets UBC, CEC and ICC National Codes.
- Meets the thermal efficiency and standby loss requirements of the U.S. Department of Energy and current edition of ASHRAE/IES 90.1
- CSA CERTIFIED AND ASME RATED T&P RELIEF VALVE MAXIMUM HYDROSTATIC WORKING PRESSURE 150 PSI DESIGN-LISTED BY UNDERWRITERS LABORATORIES
- Certified at 300 psi test pressure and 150 psi working pressure.
- Listed according to ANSI Z21. 10.3 CSA 4.3 standards governing storage tank-type water heaters.
- 6-YEAR LIMITED TANK AND PARTS WARRANTY
- For complete information, consult written warranty or State Water Heaters.com