Anden A710V1

Anden A710V1 Dehumidifier With VLGR Technology, Remote Control, 208 to 240 VAC

  • Manufacturers: Anden
  • Brand Name: Anden
  • Item #: 51315
  • MPN: A710V1
  • Qty. Interval: 1
  • Availability: Login for Availability

The Anden™ A710V1 Dehumidifier is designed for cultivation from the ground up. It utilizes innovative Variable speed, Low Grain Refrigerant Technology (VLGR patent pending) to deliver maximum performance and efficiency throughout the grow cycle. That means you can maximize your moisture removal capacity and maintain tight control over Vapor Pressure Deficit during late flower cultivation by modulating the refrigeration system to match the load. Let's take a closer look at VLGR Technology. This sophisticated system modulates the speed of dehumidification based on the precise load conditions of your grow environment, allowing for robust VPD performance across all grow conditions. The variable speed refrigeration system keeps your dehumidifiers running during the challenging late flower stage where single speed dehumidifiers require frequent defrost cycles. This increases capacity, efficiency and most importantly, the stability of your grow environment. The A710V1 is the best investment across all grow conditions compared to any dehumidifier available, removing 710 pt of moisture per day at 80 deg F/60% RH. VLGR technology allows the unit to safely operate on a 30 A breaker, while competitive options top out at 500 pt before requiring a 50 A breaker, which will dramatically increase installation costs. Installing the A710V1 is simple and the combination of the on-board digital interface with remote monitoring and control keeps you in the driver's seat for ensuring plant health and maximizing yields. Check below for the full list of industrial specs and grow-optimized features that will set your operation apart.

Anden Dehumidifier, 208 to 240 VAC, 19.6 A, 60 Hz Frequency, 1 ph, 31-23/32 in Length, 44-7/8 in Width, 34-13/32 in Height, Remote Control, 1510/1593/1677/1760 cfm, 710 ppd Water Usage Rate, 16168 Btu/hr, 3/4 in FNPT Drain Connection, Environmental Conditions: 80 to 85 deg F, 35 to 80% RH, 3 L/kW-hr Energy Factor, R410A Refrigerant, 11 MERV, 40/60 deg F

Voltage Rating      :      208 to 240 VAC
Amperage Rating      :      19.6 A
Frequency Rating      :      60 Hz
Phase      :      1 ph
Length      :      31-23/32 in
Width      :      44-7/8 in
Height      :      34-13/32 in
Control Type      :      Remote
CFM Rating      :      1510/1593/1677/1760 cfm
Water Usage Rate      :      710 ppd
BTU Rating      :      16168 Btu/hr
Drain Connection      :      3/4 in FNPT
Environmental Conditions      :      80 to 85 deg F, 35 to 80% RH
Energy Factor      :      3 L/kW-hr
Refrigerant Type      :      R410A
MERV      :      11
Temperature Rating      :      40/60 deg F
  • The most water removal for your investment
  • Delivers energy efficiency and allows for the smoothest environmental control over your grow
  • The Anden™ A710V1 is optimized for grow, giving you the power to maximize VPD across all grow conditions, including during the crucial late flower stage
  • The only dehumidifier on the market with a capacity of 500+ pints that can operate on a standard 30-amp breaker
  • Powerful circulation helps remove moisture from the air efficiently
  • Removes up to 3 L/kW-hr, helping minimize operational costs
  • The self-sealing, MERV 11 air filter protects the unit's vital components, plus it's easy to replace
  • The pre-installed electrical plug is simple to remove for hard-wired applications
  • Terminals on the dehumidifier make it easy to install a float switch to protect against overflows
  • On-board monitoring enables precise settings and simple diagnostics
  • The included Model A77 remote control measures relative humidity at canopy height for optimum control of your grow environment and relays diagnostics from the dehumidifier
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Anden_A710V1_Specification_Sheet.pdf