Important Notice: We are currently experiencing issues with sending order confirmation emails and an error message "Mail sending failed; try again later" for warranty claims. Rest assured, your orders and warranty claim submissions are being received and processed. We are actively working to resolve these issues. Thank you for your patience and understanding.

First Co. 60HBXB-HW-TXV410

First® 60HBXB-HW-TXV410 Hydronic Air Handler, 60000 Btu/hr BTU, 120 V, 1 to 11.5 A

  • Manufacturers: First Co.
  • Brand Name: First Co.
  • Item #: 2828
  • Rebate Amount:
  • MPN: 60HBXB-HW-TXV410
  • Qty. Interval: 1
  • Availability: Login for Availability

The HBXB-HW air handler is designed for use with today's high efficiency split-system condensing units, heat pumps, hot water boilers and Tankless Water Heaters.

First® Hydronic Air Handler, HBXB-HW Model, 5 ton Nominal, 60000 Btu/hr, 120 V, 1 to 11.5 A, 15 SEER, 1/2 in Liquid Line, 7/8 in Suction Line, 14 x 24 x 1 in Filter, 25-1/4 in W x 28 in D x 52 in H Dimensions

Model      :      60HBXB-HW-TXV410
Tonnage      :      5.0 Ton
BTU Rating      :      60000 Btu/Hr
Configuration      :      Upflow/Horizontal
Liquid Line Size      :      1/2 in.
Suction Line Size      :      7/8 in.
  • Eliminates field-installed boiler relay, allowing direct wiring from the boiler to the air handler
  • Preheats the HW coil for 45 s
  • Blower continues to operate for 45 s after thermostat is satisfied, for increased efficiency
  • The micro-processor powers either 120 or 24 V field supplied motorized zone valves
  • Factory or field-installed R-410A TXV (cooling or heat pump operation) (non-bleed type)
  • Manual air vent on hot water coil
  • Blower door shut-off switch (except 60HBXB-HW)
  • Slide out hot water coil for easier service
  • Copper tube heating and cooling coils
  • Compatible with all major brands of split condensing units and heat pumps
  • Attractive baked on powder coated cabinet
  • Primary and secondary condensate drain connections
  • Easily accessible 1 in filter
  • Cabinet air leakage is no more the 2% when tested in accordance with ASHRAE 193
  • Without pump